Filter
Top Products
60
Important Information
When Disposing of This Computer
When disposing of or transferring ownership of this computer, erase all data on the hard disk in order to prevent the
theft of hard disk data. Even if you delete data or initialize the hard disk through normal Windows commands, data can
still be read using special software. In order to erase all data, either have the data erased by a specialist (at a charge) or
use the hard disk data erase utility (included). (Note that this hard disk data erase utility does not guarantee that data
will be completely erased.)
Also, note that if you transfer ownership of this computer without deleting commercial software that you have installed to
the hard disk, you may be in violation of the licensing agreement for that software.
This computer is equipped with a utility for erasing hard disk data.
When disposing of or transferring ownership of this computer, erase all data on the hard disk in order to prevent the
theft of hard disk data following the steps below.
Before Erasing Data
Preparing
z You will need the Product Recovery DVD-ROM (included).
Confirm the followings
z Be sure the AC adaptor is connected until the procedure is completed.
z This utility can only be used for internal hard disk. It cannot be used to erase data
from external hard disks.
z This utility cannot erase data from damaged disk.
z This utility cannot erase data for specific partitions.
z After executing this utility, the computer cannot be booted from the hard disk.
z The backup area and the data in the backup area will be erased.
Completely Erasing Data
A Turn the computer on, and press the
F2
key while [Panasonic] boot
screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Password, and press
the
Enter
key. The [Boot] menu cannot be changed with User Pass-
word.
B Select the [Boot] menu, then select [USB CDD] and press the
F6
key until
[USB CDD] is at the top of [Boot priority order].
C Place the Product Recovery DVD-ROM into the DVD-ROM & CD-R/RW
drive.
z When the disk cover does not open:
[CD/DVD Drive Power] has been set to [Off] in the [Main] menu. Per-
form the following procedure.
Set [CD/DVD Drive Power] to [On].
Press the
F10
key.
At the confirmation message, select [Yes] and press the
Enter
key.
The computer will restart.
Press the
F2
key while [Panasonic] boot screen is displayed.
The Setup Utility will start up.
Hard Disk Data Erase Utility
The hard disk data erase utility erases data using an overwriting method, but there is a possibility that due to malfunc-
tions or other operational errors, data may not be completely erased. There are also specialized devices that may be
able to read data that has been erased using this method. If you need to erase highly confidential data, we recom-
mend that you contact a company that specializes in this process. Matsushita Electric Industrial Co., Ltd. will bear no
responsibility for losses or damages suffered as a result of the use of this utility.