Panasonic CF-W4 Series Laptop User Manual


 
33
Getting Started
In the [Boot] menu, the names of the connected devices (including internal devices) will be displayed.
"USB CDD: MATSHITA UJDA7XX" is the internal DVD-ROM & CD-R/RW drive.
To move a device up by one, select the device in [Boot priority order] using the Ï
or Ð key, and press the
F6
key.
To move a device down by one, select the device in [Boot priority order] using the Ï
or Ð key, and press the
F5
key.
z Panasonic USB floppy disk drive (CF-VFDU03 (optional)) can be used for startup (recommended).
z To return the startup order to the default settings, press the
1
key.
(The order of default settings is: USB FDD->IDE HDD->USB CDD->PCI LAN)
Password on boot
Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password
or the User Password on booting.
Disable
Enable
SD Startup
Select whether to use an SD memory card instead of entering the password on booting
([Enable]) or not ([Disable]).
When registered SD memory card, this is set to [Enable].
Cannot be set when [Password on boot] is set to [Disable].
Disable
Enable
SD Setting Method
Select whether to set an SD memory card to [Leave Set] or [Set and Eject] when an SD
memory card is used instead of entering the password.
This can be set only if [SD Startup] has been set to [Enable].
Cannot be set when [Password on boot] is set to [Disable].
Leave Set
Set and Eject
Clear registered SD card
Clear the registration from all registered SD memory cards not to be used instead of enter-
ing the password on booting.
To the sub-menu
Set Supervisor Password
Set a Supervisor Password if you wish to prevent any unauthorized changes to the Setup
Utility settings, also if you require a password on boot, set [Password on boot] to [Enable]
after you set Supervisor Password.
To the sub-menu
Setup Utility Prompt
Select whether to display ([Enable]) or not to display ([Disable]) the message “Press F2 for
Setup/F12 for LAN” shown on the bottom of the [Panasonic] boot screen that is displayed
after starting this computer.
Disable
Enable
Boot First Menu
Select whether to display “Boot Menu” ([Enable]) or not ([Disable]). (Î page 34).
Disable
Enable
Hard Disk Lock
Select whether to enable ([Enable]) or not disable ([Disable]) the [Hard Disk Lock].
This function will not work without the Supervisor Password being set.
Disable
Enable
User Password Protection
Select whether to permit changing the User Password ([Protected]) or not ([No Protec-
tion]).
No Protection
Protected
Set User Password
Set User Password when multiple users use this computer, etc.
For example, when the system administrator sets Supervisor Password and User Pass-
word and lets other users know only the User Password, other users cannot change some
of the settings in Setup Utility.
This function will not work without the Supervisor Password being set.
To the sub-menu
Boot Menu
(An underline indicates the factory default settings)