Filter
Top Products
Chapter 4 Settings — [NETWORK] menu
112 - ENGLISH
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple
computers.
f Change the password rst. (x page 121)
f The administrator rights allow use of all functions. The user rights allow use of only the following functions: [Projector status] (x page 112),
viewing of the error information page (x page 113), [Network status] (x page 114), [Access error] (x page 114), [Mail error]
(x page 114), [Basic control] (x page 115), [Advanced control] (x page 115), [Change password] (x page 121)
f Access will be locked for few minutes when an incorrect password is entered three times consecutively.
f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled
properly if it is set with a browser that does not have this function enabled.
f If the screen for the web control is not displayed, consult your network administrator.
f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
f The subsequent web control screens show examples for PT-EZ580. Screen content may differ from that for the model you are using.
Descriptions of items
1 Page tab
Pages are switched by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]
The control page of Crestron Connected
TM
is displayed by
clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the rmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
*1
Displays the status of the shutter (ON: closed, OFF: open).
5 [PICTURE MODE]
Displays the setting status of [PICTURE MODE].
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [NETWORK VERSION]
Displays the version of the rmware of the network.
8 [REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
9 [LAMP POWER]
Displays the setting status of [LAMP POWER] (x page 87).
10 [VOLUME]
Display the volume status.
11 [INPUT SELECT]
Displays the status of the selected input.
12 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
*1 For PT-EZ580, PT-EW640 and PT-EX610
[AV MUTE] for PT-EW540 and PT-EX510
Displays the status of AV mute function.