Filter
Top Products
Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 95
[NUMBER OF REGISTERED
SIGNAL]
Displays the number of registered signals.
[REMOTE2 STATUS]
Displays the control status of the REMOTE2.
[SIGNAL INFORMATION]
[MEMORY NO.]
Displays the memory number of the input signal.
[INPUT]
Displays the input terminal currently selected.
[SIGNAL NAME]
Displays the input signal name.
[SIGNAL FREQUENCY]
Displays the frequency of the input signal.
[SYNC.STATE]
Displays the synch polarity of the input signal.
[V.SYNC WIDTH]
Displays the vertical sync signal pulse width of the input signal.
[SCAN TYPE]
Displays the scan type of the input signal.
[TOTAL DOTS]
Displays the total dot count of the input signal.
[DISPLAY DOTS]
Displays the number of input signal display dots.
[TOTAL LINES]
Displays the total line count of the input signal.
[DISPLAY LINES]
Displays the number of input signal display lines.
[SAMPLING]
Displays the sampling information of the input signal.
[SIGNAL LEVEL]
Displays the signal level of the input signal.
*1 The lamp runtime displayed is calculated internally by the following conversions.
Formula for lamp replacement time (rough estimate)
Lamp runtime displayed in
[LAMP : TOTAL]
(A x 9 + B x 8) ÷ 9
f A: Runtime when [LAMP POWER] is set to [AUTO] and [NORMAL]
f B: Runtime when [LAMP POWER] is set to [ECO]
*2 Only for PT-EZ580, PT-EW640 and PT-EX610
Note
f The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the [STATUS] screen.
f Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
[DATE AND TIME]
Set the time zone, date, and time of the built-in clock of the projector.
Setting the time zone
1) Press as to select [DATE AND TIME].
2) Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3) Press as to select [TIME ZONE].
4) Press qw to switch [TIME ZONE].
Setting the date and time manually
1) Press as to select [DATE AND TIME].
2) Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4) Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
5) Press as to select an item, and press qw to set the local date and time.
6) Press as to select [APPLY], and press the <ENTER> button.
f The setting of the date and time will be completed.
Setting the date and time automatically
1) Press as to select [DATE AND TIME].