Filter
Top Products
Chapter 2 Getting Started — Connecting
40 - ENGLISH
<DisplayPort IN> terminal pin assignments and signal names
(Only for PT-EZ580, PT-EW640 and PT-EX610)
Outside view Pin No. Signal name Pin No. Signal name
Even-numbered pins of (2) to (20)
(1) (19)
(2) (20)
Odd-numbered pins of (1) to (19)
(1)
MainLane
-
3
(11)
GND
(2)
GND
(12)
MainLane+0
(3)
MainLane+3
(13)
GND
(4)
MainLane
-
2
(14)
GND
(5)
GND
(15)
Aux+
(6)
MainLane+2
(16)
GND
(7)
MainLane
-
1
(17)
Aux
-
(8)
GND
(18)
Hot plug detection
(9)
MainLane+1
(19)
GND
(10)
MainLane
-
0
(20)
DP_PWR
*1
*1 Supplies power of +3.3 V/0.5 A Max. Use at the rated power or less.
<DVI-D IN> terminal pin assignments and signal names
Outside view Pin No. Signal name Pin No. Signal name
(17)(24)
(16)
(9)
(1)(8)
(1)
T.M.D.S data 2
-
(13)
—
(2)
T.M.D.S data 2+
(14)
+5 V
(3)
T.M.D.S data 2/4 shield
(15)
GND
(4)
—
(16)
Hot plug detection
(5)
—
(17)
T.M.D.S data 0
-
(6)
DDC clock
(18)
T.M.D.S data 0+
(7)
DDC data
(19)
T.M.D.S data 0/5 shield
(8)
—
(20)
—
(9)
T.M.D.S data 1
-
(21)
—
(10)
T.M.D.S clock1+
(22)
T.M.D.S clock shield
(11)
T.M.D.S data 1/3 shield
(23)
T.M.D.S clock+
(12)
—
(24)
T.M.D.S clock
-
Connecting example: AV equipment
Audio device
Blu-ray disc player
DVD player with HDMI terminal (HDCP)
VCR (with built-in TBC)
Attention
f Always use one of the following when connecting a VCR.
g A VCR with built-in time base corrector (TBC)
g A time base corrector (TBC) between the projector and the VCR
f If nonstandard burst signals are connected, the image may be distorted. In such case, connect the time base corrector (TBC) between the
projector and the external devices.