Filter
Top Products
Start-up display
16
- ENGLISH
Preparation
Start-up display
The LANGUAGE and INITIAL SETTING menu will be displayed when the projector is turned on for the rst time
after purchase, or after doing INITIALIZE ALL (
Æ
page 63). Set them in accordance with circumstances.
In other occasions, you can change the settings navigating MENU.
Note
When the projector is turned on for the rst time, you may be required to adjust the zoom lever and focus lever (
z
Æ
page 31)
in the front of the projector body to make the menu screen clearer.
For details, see “How to adjust the state of the image”. (
Æ
page 31)
INITIAL SETTING (display
J
language)
Select the language to show on the screen.
(
Æ
page 48)
Press ▲▼◄► to select the desired 1 )
language.
INITIAL SETTING
SELECT
ENTER
PLEASE SELECT LANGUAGE.
Press the <ENTER> button, to proceed 2 )
to INITIAL SETTING.
PROJECTION METHOD (
z
Æ
page 57)
FRONT/
DESK
Setting on a desk or other in
front of the screen
FRONT/
CEILING
Mounting on the ceiling using the
ceiling mount bracket (option) in
front of the screen
REAR/
DESK
Setting on a desk or other behind
the screen (using translucent
screen)
REAR/
CEILING
Mounting on the ceiling using
the ceiling mount bracket
(option) behind the screen (using
translucent screen)
SCREEN FORMAT (
z
Æ
page 51)
[PT-FW430U only]
16:10
When projecting on a 16:10 or 4:3
screen
16:9 When projecting on a 16:9 screen
SCREEN POSITION (
z
Æ
page 51)
[PT-FW430U only]
Selectable only when [SCREEN FORMAT] is :
½
[16:9].
LOW
Displays the menu in the lower
part of the screen.
CENTER
Displays the menu in the
middle of the screen.
HIGH
Displays the menu in the upper
part of the screen.
HIGH ALTITUDE MODE (
z
Æ
page 57)
OFF
When operating at low altitude
(less than 1400 m (4593 ft) above
sea level)
ON
When operating at high altitude
(between 1400 m (4593 ft)and
2700 m (8858 ft) above sea level)
Press <ENTER> to complete the 3 )
setting.
Note
If you press [RETURN] in the [INITIAL SETTING] menu,
z
you can go back to the [LANGUAGE] menu.
J
INITIAL SETTING (projector
setup)
Select the item from the menus of [PROJECTION
METHOD], [SCREEN FORMAT], [SCREEN
POSITION], AND [HIGH ALTITUDE MODE].
Press ▲▼ to select the desired menu.1 )
Press ◄► to change the settings in 2 )
the menu.
16 10
(screen for PT-FW430U)