Technical Information
82
- ENGLISH
Appendix
Two window display combination list (PT-FW430U Only)
Subwindow
Main window
Computer DVI-I analog
VIDEO
input
S-
VIDEO
input
DVI-I digital HDMI
NETWORK
RGB
input
YP
B
P
R
input
RGB
input
YP
B
P
R
input
*1
Moving
image
system
*2
RGB
system
*1
Moving
image
system
*2
RGB
system
Computer
RGB input
YP
B
P
R
input
DVI-I
analog
RGB input
YP
B
P
R
input
VIDEO input
S-VIDEO input
DVI-I
digital
Moving image
system *
1
RGB
system *
2
HDMI
Moving image
system *
1
RGB
system *
2
NETWORK
: SIDE BY SIDE combination is possible
: SIDE BY SIDE combination is impossible
: SIDE BY SIDE combination is possible on the following conditions.
(An image may be unstable in the sub-window under some conditions.)
1) The SIDE BY SIDE signals have the same vertical scanning frequency.
2) SIDE BY SIDE combination has signals other than the combination of Interlace signals by Interlace
signals.
Only 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p, 1125(1080)/60i, 1125(1080)/50i, *1 :
1125(1080)/24p, 1125(1080)/50p, 1125(1080)/60p.
VGA (640 × 480) - WUXGA (1 920 × 1 200)*2 :
non-interlace signal, Dot clock frequency : 25 MHz - 162 MHz
(The WUXGA signals support only VESA CVT-RB (Reduced Blanking) signals.)
Note
If the horizontal resolution of the input signal of the sub window is 1 280 pixels or above, the picture quality of the sub
z
window may be lowered.
Some input signals may not display when 1125 (1080)/60p or WUXGA input signals are selected.
z