Filter
Top Products
ENGLISH -
21
Getting Started
Setting up
Projection method
You can use the projector with any of the following 4 projection methods. To set the desired method in the projector.
J
Mounting on the ceiling and
projecting forward
J
Setting on a desk/oor and
projecting from rear
(Using translucent screen)
Menu
Û
Method
PROJECTION
METHOD
FRONT/CEILING
Menu
Û
Method
PROJECTION
METHOD
REAR/DESK
J
Mounting on the ceiling and
projecting from rear
(Using translucent screen)
J
Setting on a desk/oor and
projecting forward
Menu
Û
Method
PROJECTION
METHOD
REAR/CEILING
Menu
Û
Method
PROJECTION
METHOD
FRONT/DESK
Refer to “PROJECTION METHOD” of “PROJECTION SETUP menu” (½
Û
Æ
pages 57) for details.
Attention
For optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light xtures
z
or other light is at a minimum. Also draw the curtains, close blinds and turn off light xtures.
Do not use the projector installed vertically or tilted right or left. Use under such conditions could result in equipment
z
damage.
The projector must be installed so that its inclination to the horizontal plane is ±30° or less.
z
Installing the projector at an inclination that exceeds 30° may reduce product life or result in
z
malfunction.
Parts for ceiling mount (Optional)
You can install the projector on the ceiling using the optional ceiling mount bracket (ET-PKF110H: for high ceiling,
ET-PKF110S½ for low ceiling).
Use only the ceiling mount brackets specied for this projector.
z
Refer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.
z
Be sure to consult your dealer when using the ceiling mount bracket for the PT-F300U/PT-FW300U (ET-
z
PKF100H for high ceilings or ET-PKF100S for low ceilings).
Attention
To ensure projector performance and security, installation of the ceiling mount bracket must be carried by your
z
dealer or a qualied technician.