Filter
Top Products
64
- ENGLISH
Settings
SECURITY menu
Select [SECURITY] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
When you operate the projector for the rst time.
z
Factory default password:
Press▲►▼◄▲►▼◄ and the <ENTER>
button.
After selecting the item, press ◄►▲▼ to set.
z
Remote Control
Control Panel
Attention
Please set the settings after you display the [SECURITY]
z
screen.
When the [SECURITY] screen appears, password entry
z
is required. Enter the registered security password to
continue operations.
If you changed the password before, please enter the
z
password you registered and press the <ENTER> button.
Note
Only asterisks * will appear on the screen to represent
z
the actual characters of the password when the password
is entered.
PASSWORD
The [PASSWORD] screen can be displayed when the
power has been turned on. If the correct password is
not entered, only POWER ( ) button operations will
be available.
Press ▲▼ to select [PASSWORD].1 )
Press ◄► to switch [PASSWORD].2 )
The setting will change as follows each time the
z
button is pressed.
OFF ON
OFF Disables Password
ON Enables Password
Note
[PASSWORD] is set to [OFF] by default and when
z
INITIALIZE ALL is executed.
Change the SECURITY PASSWORD regularly and make
z
it uneasy to guess.
The password becomes valid when setting of the
z
password is turned [ON] and then the MAIN POWER
switch is turned off.
PASSWORD CHANGE
The password can be changed.
Press ▲▼ to select [PASSWORD 1 )
CHANGE].
Press the <ENTER> button.2 )
The [PASSWORD CHANGE] screen will be
z
displayed.
Press ▲▼◄► and numeral keys to 3 )
set the password.
Up to 8 buttons can be set as the password.
z
Press the <ENTER> button.4 )
For the purposes of conrmation, 5 )
enter the password again.
Press the <ENTER> button.6 )
Note
Only asterisks * will appear on the screen to represent
z
the actual characters of the password when the password
is entered.
If the wrong password is entered, an error message
z
appears on the screen. Enter the correct password again.
When numerals are used in the SECURITY PASSWORD,
z
initialization of the security password will be necessary if
the remote control is lost. For the method of initialization,
consult your dealer.