Filter
Top Products
Setting up
24
- ENGLISH
Getting Started
Adjusting front adjustable feet
You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contract
them.
(You can adjust the projection angle vertically.)
Attention
Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
z
the front adjustable feet.
If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Position” menu. (
z
Æ
page 42)
Note
Screw up the adjustable feet, and an audible click will be heard as the limit.
z
Adjustable range
Front adjustable feet : 19 mm(3/4")
Adjusting the position using the lens shift function
If the projector is not positioned right in front of the center of the screen, you can adjust the projected image
position by moving the lens shift lever within the shift range of the lens.
Adjusting the lens shift
J
1 ) Screw the lens shift lever as shown
(counterclockwise) to unlock.
Adjust the projection moving the lens shift lever.2 )
Move the lens shift lever to adjust the projected image position.
(Shows the example of the projector on the oor projecting forward)
Horizontal shift
z
In accordance with the position of the screen and the projector, shift the lens shift lever right or left.
Shifting the lens
shift lever to the
direction A
Shifting the lens
shift lever to the
direction B
PT-FW430U : Up to about 24 % of the projection
PT-FX400U : Up to about 27 % of the projection
Screen
Direction A
Direction B