Filter
Top Products
PICTURE menu
40
- ENGLISH
Settings
ADVANCED MENU
Press ▲▼ to select the [ADVANCED 1 )
MENU].
Press the <ENTER> button.2 )
The [ADVANCED MENU] screen appears.
z
Press ▲▼ to select settings between 3 )
[CONTRAST R] and [BRIGHTNESS B].
Press ▲▼ or the <ENTER> button.4 )
Use ▲▼ to adjust the level.5 )
Adjustments can be made in the range +32
z
(maximum) to -32 (minimum).
Adjustment Operation Result
CONTRAST R Press ►. Emphasizes red in
highlight areas
Press ◄. Deemphasizes red
in highlight areas
CONTRAST G Press ►. Emphasizes green
in highlight areas
Press ◄. Deemphasizes
green in highlight
areas
CONTRAST B Press ►. Emphasizes blue in
highlight areas
Press ◄. Deemphasizes blue
in highlight areas
BRIGHTNESS R Press ►. Emphasizes red in
shadow areas
Press ◄. Deemphasizes red
in shadow areas
BRIGHTNESS G Press ►. Emphasizes green
in shadow areas
Press ◄. Deemphasizes
green in shadow
areas
BRIGHTNESS B Press ►. Emphasizes blue in
shadow areas
Press ◄. Deemphasizes blue
in shadow areas
DAYLIGHT VIEW
This corrects images so that they appear vivid when
projected under bright lighting.
Press ▲▼ to select [DAYLIGHT VIEW].1 )
Press ◄► or the <ENTER> button.2 )
The [DAYLIGHT VIEW] individual adjustment
z
screen will be displayed.
Press ◄► to switch [DAYLIGHT VIEW].3 )
The setting will change as follows each time
z
you press the button.
AUTO ON OFF
AUTO
Automatically adjustment to suit ambient
brightness
ON Enable DAYLIGHT VIEW
OFF Disable DAYLIGHT VIEW
Note
You can not set [AUTO] if [REAR/DESK] or [REAR
z
CEILING] is selected for [PROJECTION METHOD] of
[PROJECTOR SETUP].
The [AUTO] mode may not function properly if an object
z
is placed on the top of the projector.
DIGITAL CINEMA REALITY
You can improve the vertical resolution of 2-2 and 2-3
pulldown video.
This function is available only with the following signal
inputs.
(525i(480i), 625i(576i), 1125(1080)/60i,
1125(1080)/50i)
Press ▲▼ to select [DIGITAL CINEMA 1 )
REALITY].
Press ◄► or the <ENTER> button.2 )
The [DIGITAL CINEMA REALITY] screen
z
appears.
Press ◄► to switch [DIGITAL CINEMA 3 )
REALITY] settings.
Each press of the button switches the settings
z
as shown below.
OFF ON
OFF Disable DIGITAL CINEMA REALITY
ON Enable DIGITAL CINEMA REALITY