Filter
Top Products
PROJECTOR SETUP menu
60
- ENGLISH
Settings
EMULATE
When using the control commands for one of our
projectors that you have previously purchased to
control this projector using a computer via its serial
input terminal, set up the EMULATE function as
follows. This will allow you to use the control software
etc. designed for our existing projectors.
Press ▲▼ to select [EMULATE].1 )
Press the <ENTER> button.2 )
The [EMULATE] screen appears.
z
Press ▲▼ to select the required item.3 )
Press the <ENTER> button.4 )
Note
Refer to “Serial terminal” (
z
Æ
page 77).
DEFAULT
FX400 Series, FW430 Series,
F100 Series, FW100 Series,
F200 Series, F300 Series,
FW300 Series
D3500 D3500 Series
D4000 D4000 Series
D/W5k
D5500 Series,
DW5000 Series, D5600 Series,
DW5100 Series, D5700 Series
D/W/Z6k
D5000 Series, D6000 Series,
DW6300 Series,
DZ6700 Series,
DZ6710 Series,
DZ570 Series,
DW530 Series,
DX500 Series
L730
L520 Series,
L720 Series, L730 Series
L780 L750 Series, L780 Series
L735 L735 Series
L785 L785 Series
LB/W
LB2 Series, LB1 Series,
LB75 Series, LB80 Series,
LB90 Series, ST10 Series,
LB3 Series, LW80NT Series
FUNCTION BUTTON
Three function buttons (<FUNC 1> to <FUNC 3>) on
the remote control can be assigned to any frequent
operations. They can be used as a useful shortcut
button.
To assign functions to the
J
<FUNC1> to <FUNC3> buttons
Press <MENU> button on the remote 1 )
control or the projector to select a
menu option (Main Menu, Sub-menu or
Advanced Menu).
For the on-screen menu selection, see
z
“Navigating through the menu". (
Æ
page 35)
Hold down any of the <FUNC 1> to 2 )
<FUNC 3> buttons on the remote
control more than 3 seconds.
To cancel functions assigned
J
to the <FUNC1> to <FUNC3>
buttons
Press ▲▼ to select [FUNCTION].1 )
Press the <ENTER> button.2 )
Press ▲▼ to select [CANCEL] for 3 )
the function button (<FUNC1> to
<FUNC3>) assigned with the function.
Press the <ENTER> button.4 )
When the conrmation screen appears, 5 )
press ◄► to select [OK], then press
the <ENTER> button.
Note
When the setting is complete, the following indicators
z
will apprear to the left of the assigned menu item (Main
menu, Sub-menu, or Advanced menu): F1 for <FUNC1>,
F2 for <FUNC2>, and F3 for <FUNC3>.