Filter
Top Products
POSITION menu
ENGLISH -
47
Settings
REAL
J
The image is projected without size adjustment,
keeping the resolution of the input signals.
Settable when the input signals are smaller than
the number of the pixels of the projector’s LCD
(1024 x 768).
Input signal: NTSC
z
Image: Panel:
Attention
When an image of 4:3 aspect ratio is projected in the
z
16:9 ratio, the edges of the image may become invisible
or distorted. It is recommended to select the 4:3 aspect
ratio to respect the intention of the image creator.
Note
If you select an aspect ratio different from the input
z
signals, the image displayed will be different from the
original image.
When used for commercial use or public viewing (in
z
a coffee shop, hotel, etc.,), stretching or shrinking a
copyright-protected image using the aspect ratio function
of this projector may infringe on the copyrights.
FRAME LOCK
[Only for RGB/DVI (analog) and HDMI signals
input]
Settable for specic computer signals.
Set when the movie is distorted.
Select [FRAME LOCK] using the ▲▼ 1 )
buttons.
Press ◄► or the <ENTER> button.2 )
The [FRAME LOCK] screen appears.
z
Press ◄► to set [FRAME LOCK].3 )
On Off
On Enable FRAME LOCK
Off Disable FRAME LOCK