Filter
Top Products
NETWORK
ENGLISH -
67
Settings
NETWORK
Select [NETWORK] from the Main Menu (see
“Navigating through the menu” on page 35),
then select the item from the sub-menu.
After selecting the item, press ▲▼◄► to set.
z
Remote Control
Control Panel
Note
Set this to connect the projector to a computer via a
z
network. For details of PJ Link Network, see “Operation
Manual, Network Operations”.
When [PASSWORD] in the [SECURITY] menu is [ON], a
z
password is required to initialize the network.
WIRED LAN
J
You can set Wired LAN.
WIRELESS LAN *
J
1
You can set Wireless LAN.
NAME CHANGE
J
You can change the name of the projector.
PASSWORD SETTING
J
When you connect the projector using Wireless
Manager ME5.5, you can set the password and
restrict the access to the projector by setting this
to [ON].
(Factory default is [OFF].)
PASSWORD CHANGE
J
You can change the password for network.
NETWORK CONTROL
J
You can set the method of network control.
(Factory default is [ON].)
LIVE MODE CUT IN
J
When Live Mode is activated (images are being
sent) using Wireless Manager ME5.5, you can
permit cut in connection by other users by setting
this to [ON].
(Factory default is [OFF].)
COMPUTER SEARCH *
J
1
You can search for a computer to connect to using
Wireless Manager ME5.5.
MULTI-LIVE
J
Used when connecting to a computer using
Wireless Manager ME5.5.
STATUS
J
Shows the network status of the projector.
INITIALIZE
J
You can use this function to return network
settings to their factory defaults.
Settable only when the optional wireless module *1 :
(ET-WM200U) is attached.