Filter
Top Products
ENGLISH -
31
Basic Operation
Projecting
Check the connections of the peripheral devices (
Æ
page 27) and connection of the power cord (
Æ
page 28) and
switch on the power (
Æ
page 29) to start the projector. Select the image and adjust the state of the image.
Selecting the image
Select an input signal.
The image selected with the <COMPUTER>, <DVI-I>,
<VIDEO/S-VIDEO>, <NETWORK>, or <HDMI> button
is projected. (
Æ
page 32)
Attention
Images may not be projected properly depending on the
z
connected device and DVD, video tape, etc. to be played.
Select a system format that is suitable for the input signal
in [TV SYSTEM] or [RGB/YP
B
P
R
] in the [PICTURE] menu
(
Æ
page 41).
Check the aspect ratio of the screen and the image and
z
select the optimum aspect ratio using [ASPECT] in the
[PICTURE] menu (
Æ
page 44).
Screw [Lens shift lever] clockwise to 3 )
lock [Lens shift lever].
Adjust the projection angle.4 )
For details, see “Adjusting front adjustable feet”.
z
(
Æ
page 24)
Adjust the zoom and the focus.5 )
Turn [Zoom lever] and [Focus lever] to adjust the
image.
Note
It is recommended that the images are projected
z
continuously for at least 30 minutes before the focus is
adjusted.
If you adjust the focus, you may need to adjust the size
z
of the image by moving the zoom lever again.
If keystone distortion occurs, see “KEYSTONE”
z
(
Æ
page 42).
How to adjust the state of the
image
Screw [Lens shift lever] 1 )
counterclockwise to unlock [Lens shift
lever].
Adjust the lens shift.2 )
Adjust the projection position by moving [Lens
shift lever].
For details of the adjustable range, see
z
“Adjusting the position using the lens shift
function”. (
Æ
page 24)
Zoom lever
Focus lever
Lens shift lever