Filter
Top Products
DISPLAY OPTION menu
50
- ENGLISH
Settings
DVI-I IN
Change this setting if the image is not displayed
properly while signals from an external device are
input to the DVI-I terminal of the projector.
Press ▲▼ to select [DVI-I IN].1 )
Press the <ENTER> button.2 )
The [
z
DVI-I IN] screen will be displayed.
Press ▲▼ to select items and ◄► to 3 )
switch settings.
DIGITAL/ANALOG
J
Each press of the button switches the settings as
z
shown below.
DIGITAL ANALOG
DIGITAL
Select this when a digital signal is
input.
ANALOG
Select this when an analog signal is
input.
DVI EDID
J
Each press of the button switches the settings as
z
shown below.
EDID1 EDID2 (PC)
EDID1
Select this when an external device
(DVD player, etc.) for outputting
video signals of a moving image
system is connected to DVI-I IN
terminal.
EDID2 (PC)
Select this when an external device
(PC, etc.) for outputting video signals
of a still image system is connected
to DVI-I IN terminal.
DVI SIGNAL LEVEL
J
Each press of the button switches the settings as
z
shown below.
0-255 : PC 16-235
0-255 : PC
Select this when the digital output
from an external device, such as a
computer, is connected to the DVI-I
IN terminal, or in similar cases.
16-235
Select this when the output from
the HDMI terminal of an external
device, such as a DVD player, is
connected to the DVI-I IN terminal
via a conversion cable, or in similar
cases.
Note
The optimal setting differs depending on the output
z
setting of the connected external device. Refer to the
instruction manual of the external device.
If the setting is changed, the data for plug and play
z
changes. For the plug and play compatible resolutions,
refer to “List of compatible signals” (
Æ
page 83).
HDMI IN
Change this setting if video does not display normally
when the projector and an external device are
connected via HDMI.
Press ▲▼ to select [HDMI IN].1 )
Press the <ENTER> button.2 )
The [
z
HDMI IN] screen will be displayed.
Press ◄► to switch [HDMI SIGNAL 3 )
LEVEL].
Each press of the button switches the settings
z
as shown below.
0-1023 64-940
0-1023
Select this when, for example, a DVI
terminal output of an external device
(PC etc.) is connected to HDMI IN
using a conversion cable, etc.
64-940
Select this when, for example,
an HDMI terminal output of an
external device (DVD player, etc.) is
connected to HDMI IN.
Note
The optimal setting differs depending on the output
z
setting of the connected external device. Refer to the
instruction manual for the external device.
The displayed HDMI signal level is the value when the
z
input is 30 bit.