Filter
Top Products
111
Settings of wireless card
qq
Click the icon on the task bar and,
from "Menu", open "Advanced
Settings".
ww
Enter the name in "Profile Name" to
preserve the settings.
The initial value is set to Default .
Only alphanumeric characters and symbols are
acceptable.
ee
If the Communication mode is set to
"Infrastructure" (Access Point) or to
"PEER-TO-PEER":
Set Network name (SSID) to the same setting as
the projector.
If the Communication mode is set to
"AdHoc" (Pseudo AdHoc):
Set the channel to the same number as the
projector.
rr
If WEP (encryption) has been set in
the projector:
Select the "WEP mode", and set it to the same
settings as the projector and the access point.
64 (40) bit encryption
To enter an encryption key:
Characters: 5 characters
Hexadecimal numbers: 10 digits
Select a default key number from 1 to 4.
128 (104) bit encryption
To enter an encryption key:
Characters: 13 characters
Hexadecimal numbers: 26 digits
Select a default key number from 1 to 4.
tt
Click the Apply button.
Click the OK button to close the window.