Filter
Top Products
LOCK
)
(
19
Preparation
'% &
$
#
<SD memory card><Card slot>
Front Back
#Slot cover
Covers the card slots. When
using an optional projector LAN
card, replace the slot cover (refer
to page 54).
$Card slot
Insert an optional wireless card or
a projector LAN card into here.
%Eject switch
Use to remove an optional
wireless card or projector LAN
card from the card slot.
&Access lamp
Flashes while the projector is
being accessed for reading or
writing the data in the SD
memory card.
'SD memory card slot
Insert the SD memory card into
here.
(Metal terminals
These terminals are for
connecting the SD memory card
to the projector’s card slot. Do not
touch the metal terminals with
hands or metal objects, attach
stickers to them, or allow them to
become contaminated in any
way.
)Write-protect switch
If the write-protect switch on the
SD memory card is moved to the
LOCK position, it will not be
possible to use any file editing
functions such as deleting or
moving image files.
(PT-L780NTU only)
RGB signals and YPBPR signals.
-RGB AUDIO IN jack
(pages 26 and 27)
Only one system is provided, so
connect the appropriate
connector when using RGB1,
RGB2 or RGB3.
.VIDEO IN jack
(page 26)
This jack is used to input video
signals from a video equipment
such as a video deck.