Panasonic TQBH9003-6 Projector User Manual


 
48
WEB PASSWORD
(PT-L780NTU only)
You can set the password for
controlling the projector with a
personal computer by means of a
wireless or wired network using an
optional wireless or projector LAN
card. Use the F or G buttons to
change the characters, and use the
I or H buttons to change the
character position. When finished,
press the ENTER button. The
projector comes from the factory
without any password.
If password setting is complete, the
password will not be displayed on
the WEB PASSWORD screen.
When you forget it, set it again from
the beginning.
CONTROL KEY
To make the buttons on the
projector not function, set the
CONTROL KEY to OFF.
To use the buttons on the projector,
set to ON. (page 16)
FUNC 1
This assigns a function to the FUNC1
button of the remote control unit .
MUTE
B
Functions in the same way as the
MUTE function. (page 45)
KEYSTONE
BFunctions in the same way as
when KEYSTONE is selected
from the POSITION menu
screen. (page 42)
SET ID
UNIT ID is used to set projector IDs
to control two or more projectors
either simultaneously or separately.
ALL: The projectors can be
simultaneously controlled from
any remote control unit
regardless of their ID settings.
1: The projector can be controlled
from the remote control unit
with its projector ID set to 1.
2: The projector can be controlled
from the remote control unit
with its projector ID set to 2.
3: The projector can be controlled
from the remote control unit
with its projector ID set to 3.
NOTE:
UNIT ID is set to ALL by default.
Hence ID number need not be set
when only one projector is used.
If the projectors are given ID
numbers, their remote control units
must be assigned the same ID
numbers, respectively.
If the UNIT ID s of two or more
projectors are set to ALL, the user
will not be able to control them
separately.
The projector can be turned ON/OFF
from the remote control unit only if the
projector ID is set in the remote
control unit. For the details of
projector ID setting, see page 23.
AUTO POWER OFF
If any signal is not input into the
projector during the time that you set
up, the projector will return to standby
mode. The auto power off time can
be set to, from 15 minutes to 60
minutes, by 5 minutes. If you don't
use this feature, set it to OFF.
SET ID ALL
[
1
[
2
[
3