Filter
Top Products
Control Panel
15
Getting to Know
Your Machine
18
15
17
16
13 14
No. Icon Contents No. Icon Contents
8 9
10 11
12
Active LED lamp (GREEN)
Flashes: When machine is
active.
Lights: When the received fax
message is in memory.
Status LED lamp (RED)
- Lights/Flashes when trouble occurs.
Lights: Machine has detected a trouble status
- No paper in the selected tray or toner has run out.
- Machine has detected trouble, such as paper misfed or jammed.
Flashes: Machine detected an alarm status
- No paper in the tray. (Tray not selected)
- Toner is getting low, etc.
- Press this key to start activation.
- Used to start On-Hook
Dialing. (See page 61)
- Used to separate the Sub-
Address from the telephone
number.
- Used to start Abbreviated
Dialing.
(See pages 51 and 58)
- Used to enter a pause when
entering or dialing a telephone
number, or to redial the last
dialed number.
Keypad
- Used for manual number dialing, entering phone numbers, and numerical
entries.
Key
- Used to temporarily change the dialing mode to Tone when Pulse mode is set.
- Used for copy operations.
(See page 75)
- Press this button when you want
to stop communication,
registration operation, or audible
tone.
One-Touch Keys (01-32)
- Used for One-Touch Dialing. (See pages 51 to 58)
Program Keys (P1-P8)
- Used to enter long dialing procedures or Group Dialing Number keys.
(See pages 81 to 86)
Character Keys
- The One-Touch Keys and Program Keys serve as character and symbol input
keys which are used to enter your LOGO, character ID and station name.
- Used to enter a symbol for LOGO, character ID and station name.
Use or to select the symbols.
- Used to insert a space while entering LOGO, character ID and station name.
- Used to switch between upper and lower character set.
UF6200_FAX_USA_PJQMC1259ZA.book 15 ページ ２００８年８月１９日 火曜日 午後３時１２分