Filter
Top Products
Edit File Mode
89
Advanced
Features
To change the start time and/or stations in a communication file, follow the steps below.
NOTE
1. Your machine cannot change the start time and/or stations in the file while stored document is
being sent or the machine is waiting to redial.
2. If the file is not a Deferred Communication File, the following message is shown in the display.
SET DEFERRED COMM.?
1:YES 2:NO
Press to change the type of the file for deferred communication file.
Changing the Start Time or the Station of a File
1
EDIT FILE MODE (1-6)
ENTER NO. OR ∨ ∧
2
ENTER FILE NO.OR ∨ ∧
FILE NO.=
3
Enter the file number or use or to select the file
that you want to change.
Ex:
ENTER FILE NO.OR ∨ ∧
FILE NO.=001
4
(See Note 2)
DEFERRED XMT
START TIME 22:30
5
Enter a new start time.
Ex: (6:00 a.m.)
(If you do not have to change the time, skip to step 6.)
DEFERRED XMT
START TIME 06:00
6
<01>(Station name)
5551234
7
To delete the station(s), press or key until the
station you want to delete appears. Then press .
or
Enter the station(s) you want to add.
ENTER STATION(S)
THEN PRESS START
1 STN(S) ARE SET
ADD MORE OR START
8
* STORE * NO.005
9
2
0 0 1
0
6
0 0
Clear
1
UF6200_FAX_USA_PJQMC1259ZA.book 89 ページ ２００８年８月１９日 火曜日 午後３時１２分