Filter
Top Products
Sending Documents
54
The following functions have been provided to prevent transmission to a wrong address.
These include the dial re-enter function to prohibit direct dialing or multiple addresses, and a function to
confirm the address.
Direct Dial Restriction Function
This function prohibits all designations of addresses by direct dialing (Including manual transmission). This
function operates if Fax Parameter “136 RESTRICT D. DIAL” of Fax Parameter set to “VALID”. (See page
40)
• If this function is set, even when telephoning from an external device, it is not possible to use direct dialing.
However, if direct dialing standby is displayed, press to start redial.
Multiple Address Prohibit Function
With this device, it is possible to combine direct dialing and AUTO dialing, etc. to send the same document
by fax to multiple addresses. If you do not wish to send to multiple addresses, set setting “117 MULTI
STATION” of Fax Parameter set to “INVALID” and the system will be set to transmit to only one address.
This is useful to prevent mistaken transmission to multiple addresses.
NOTE
1. If multiple address designation is set to “INVALID”, it is not possible to transmit to multiple
addresses.
2. If multiple address designation is set to "INVALID", it is not possible to use group dial.
3. If multiple address designation is set to “INVALID”, it is possible to use the program dial in
which multiple addresses are set.
Wrong Transmission Prevention Function
If keypad or are pressed, the following message will appear on
your display.
DIRECT DIAL IS
NOT AVAILABLE
If you specify multiple addresses, the following message will appear on your display. NOT AVAILABLE.
ONLY 1 STN PERMITTED
Redial/Pause
Redial/Pause
UF6200_FAX_USA_PJQMC1259ZA.book 54 ページ ２００８年８月１９日 火曜日 午後３時１２分