Filter
Top Products
Sending Documents
57
Basic Operations
If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialing (Direct Transmission)
Without stroing image into memory, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first and then press
to enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a"/"). The dialing method will be changed from Pulse to Tone after
dialing the digit "/".
Ex : 9 PAUSE * 5551234
3. To stop the transmission, press .
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press to stop the transmission. The Communication Journal will not print out regardless of
the printout mode setting of the Communication Journal.
Direct Transmission
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
MEMORY XMT=ON
1:OFF 2:ON
3
ENTER STATION
00%
4
Enter the telephone number from the keypad.
Ex:
PRESS START TO DIAL
5551234
5
Your machine starts to dial the telephone number.
* DIALING *
5551234
8
9
1
5 5 5 1 2
3
4
Redial/Pause
Sto
p
1
UF6200_FAX_USA_PJQMC1259ZA.book 57 ページ ２００８年８月１９日 火曜日 午後３時１２分