Filter
Top Products
User Parameters
29
Installing Your
Machine
If the remote machine does not have a Character ID but has an ID Number, when sending or receiving, your
ID Number will appear on the remote machine's display and their ID Number will appear on your display.
We suggest you use your facsimile telephone number as your ID number. (Up to 20 digits)
NOTE
1. You may use to enter a "+" character at the beginning of the ID number to indicate the
following digit(s) for your country code.
Ex:+1 XXX XXX XXXX+1 for U.S.A. country code.
+81 X XXX XXXX +81 for Japan country code.
2. Your Fax Telephone Number must be set as your ID Number because it is required by the
Telephone Consumer Act of 1991. (For details, see FCC NOTICE at the end of this Operating
Instructions)
Setting Your ID Number (Fax Telephone Number)
1
SET MODE (1-8)
ENTER NO. OR ∨ ∧
2
1:USER PARAMETERS?
PRESS SET TO SELECT
3
repeatedly until display shows;
ID NO.
4
Enter your ID (up to 20 digits) by using the keypad and
press the key to enter a space between numbers.
Ex:
If you made a mistake, use or to move the cursor
one space beyond the incorrect number, press
and then re-enter the new number.
ID NO.
201 555 1212
5
7
1
2 0 1 5 5 5 1 2 1 2
Clear
UF6200_FAX_USA_PJQMC1259ZA.book 29 ページ ２００８年８月１９日 火曜日 午後３時１２分