Filter
Top Products
Loading Documents
43
Basic Operations
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the document(s) FACE DOWN on the Automatic Document Feeder (ADF) until the leading edge
inserted in the machine stops.
If you are sending multiple pages, make sure that the bottom sheet enters first. You can also stack up
to 50 PAGES on the ADF at one time by setting the documents as stairs shape as the figure below.
If you have more than 50 pages, wait until transmission or storing in memory starts as pages feed
through, and place any remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings or begin the dialing procedure.
ENTER STATION(S)
THEN PRESS START 00%
NOTE
1. The document limitation to send multiple pages is as follows.
* Please note that although the size and thickness meets the specifications, you might not be
able to set 50 pages with some types of paper.
2. Transmitting documents longer than 356 mm (14”) requires user's assistance.
3. When transmitting documents longer than Letter size (8.5” x 11“), please extend the sub-tray
as shown below.
How to Load Documents
Document Size Document Thickness
Up to 20 pages Up to 257 x 364 mm (10.1” x 14.3”) 0.0024” - 0.0048”
Up to 30 pages* A4 or Letter size 0.0024” - 0.0039”
CORRECT
INCORRECT
Document Guides
Document Sub Tray
UF6200_FAX_USA_PJQMC1259ZA.book 43 ページ ２００８年８月１９日 火曜日 午後３時１２分