Filter
Top Products
Customizing Your Machine
36
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
01 CONTRAST 1 NORMAL Setting the home position of the CONTRAST key.
2LIGHTER
3 DARKER
02 RESOLUTION 1 STANDARD Setting the home position for the RESOLUTION.
2FINE
3S-FINE
4 HALFTONE
(FINE)
5HALFTONE
(S-FINE)
04 STAMP (HOME) 1 OFF Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2ON
05 MEMORY (HOME) 1 OFF Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
2ON
06 DIALING METHOD 1 PULSE Selecting the dialing method.
2TONE
07 HEADER PRINT 1 INSIDE Selecting the printing position of the header.
INSIDE : Inside TX copy area.
OUTSIDE : Outside TX copy area.
NO PRINT : Header is not printed.
2 OUTSIDE
3 NO PRINT
08 HEADER FORMAT 1 LOGO, ID
NO.
Selecting the header format.
2FROM TO
09 RCV'D TIME PRINT 1 INVALID Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received page.
2VALID
10 KEY/BUZZER
VOLUME
1 OFF Selecting the volume of the Key/Buzzer tone.
2SOFT
3LOUD
12 COMM. JOURNAL 1 OFF Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
OFF : Does not print
ALWAYS : Always prints
INC. ONLY: Prints only when communication has failed.
2ALWAYS
3 INC. ONLY
13 AUTO JRNL PRINT 1 INVALID Selecting whether the machine prints the journal
automatically after every 32 transactions.
2VALID
17 RECEIVE MODE 1 TEL Setting the receive mode.
2FAX
3 FAX/TEL
SW.
4TAM/FAX
UF6200_FAX_USA_PJQMC1259ZA.book 36 ページ ２００８年８月１９日 火曜日 午後３時１２分