Filter
Top Products
Sending Documents
49
Basic Operations
Manual Number Dialing
To dial the telephone number manually, follow the steps below.
NOTE
1. If you need a special access number to get an outside line, dial it first then press
to enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press (represented by a"/"). The dialing method will be changed from Pulse to Tone after
dialing the digit "/".
Ex : 9 PAUSE * 5551234
3. This feature is called “Quick Memory Transmission”. If you wish to store all the document(s)
into memory first before transmitting, change the Fax Parameter No. 82 (QUICK MEMORY
XMT) to “INVALID”. (See page 39)
Memory Transmission
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Enter a telephone number from the keypad.
(Up to 36 digits)
You can also designate more than one destination.
Ex:
TEL. NO.
5551234
3
The document is stored into memory with a file number.
It then starts dialing the telephone number immediately
after storing the first page. (See Note 3)
The remaining page(s) continue to be stored into memory.
* STORE * NO.002
PAGES=001 05%
* DIALING * NO.002
5551234
5 5 5 1 2
3
4
Redial/Pause
UF6200_FAX_USA_PJQMC1259ZA.book 49 ページ ２００８年８月１９日 火曜日 午後３時１２分