Filter
Top Products
A-1
8000-A2-GB20-50
April 2000
Download Code
A
The Hotwire DSL system’s Download Code menu option gives you the ability to
upgrade your software with a new version of code and then apply this code to
your system.
NOTE:
Before attempting a download, verify that you can Ping or Telnet to the TFTP
server. If you cannot, do not proceed with the download. Also, make certain
that the files that you are going to download from exist in the system.
New firmware releases are typically applied to either the MCC or RADSL cards in
your system. When a software upgrade affects both the MCC and the RADSL
cards, you must download and apply a new version of code into each of the
RADSL cards before you download and apply a new version of code into the
MCC.
When you are attempting to download to the RADSL cards, refer to Download
Code. In general, the following sections describe what to expect when you have
initiated a download from the configuration menu.