Filter
Top Products
RADSL Card Configuration
3-21
8000-A2-GB20-50
April 2000
The following table lists warnings and error messages displayed on the Static
Routes screen (A-E-A).
Message
Meaning
Routing Table: Route not
added
Route was saved into NVRAM but not added to the
active routing table.
Routing Table: Route limit
reached for interface
Route was saved into NVRAM but not added to the
active routing table because there are already 32 routes
for the interface.
Routing Table: Route limit
reached for routing table
Route was saved into NVRAM but not added to the
active routing table because the active routing table is
full.
Routing Table: Client limit
reached for interface
(8540 only)
Route was saved into NVRAM but not added to the
active routing table because the endpoint connected has
reached its client limit.
Routing Table: Interface not
active (8540 only)
Route was saved into NVRAM but not added to the
active routing table because the endpoint is not
connected at this time. When the interface comes up, the
route will be added.
Routing Table: Next hop
gateway currently
unreachable
Route was saved into NVRAM but not added to the
active routing table because there is no way to reach the
next hop gateway. If an interface comes up that has the
next hop gateway, the route will be added.
Routing NVRAM: Database
Error
Route was not saved into NVRAM and not added to the
active table. This is a general database error.
Routing NVRAM: Database
Route Limit Reached
Route was not saved into NVRAM and not added to the
active table because the NVRAM is full.
Cannot delete a remote
route
You cannot delete a remote route.
Cannot modify a remote
route
You cannot modify a remote route.