Filter
Top Products
RADSL Card Configuration
3-18
8000-A2-GB20-50
April 2000
DSL Configuration Users Screens
Use the system information submenu of the Users screens to configure user login
accounts for Telnet sessions directly to the DSL cards.
User accounts provide security for the DSL system by requiring that anyone who
is trying to log on to the system has a valid password to gain access.
It is recommended that user accounts also be set up for each DSL card, even if
you do not intend to Telnet directly to the RADSL cards, so that no unauthorized
Telnet sessions can be made. Each card will support up to 10 user accounts with
either Operator (read-only) or Administrator (read/write) permissions.
For information on setting up user accounts on the MCC card, see Hotwire
Management Communications Controller (MCC) Card User’s Guide.
" Procedure
To configure RADSL user accounts (if Telneting directly to the RADSL card) (for
Model 8540 only):
1. Follow this menu sequence from the DSL Main Menu:
Configuration →Users→Accounts (A-D-A)
2. The Accounts screen appears. Enter the desired values in the fields as
shown in Table 3-4.
3. Enter Y to save changes and press Ctrl-z to return to the Hotwire Chassis
Main Menu tree.
Press Ctrl-v to see a list of all user accounts at the Login id prompt.
4. Reboot the RADSL card after the changes have been made (A-A-F).