Filter
Top Products
5446 RTU Setup
C-8
8000-A2-GB20-50April 2000
Network Management Systems
OpenLane DCE Manager, one of Paradyne’s Network Management Systems,
communicates via SNMP to the RTU to update the IP configuration table. Display
of the remote RTU and the use of the injection tool are features of this product.
The NMS workstation is typically connected to a router and the NMS can easily
access devices on other subnets. If the NMS is connected to other hardware,
such as a hub, then the explicit routes to the other subnets must be defined on
the system that has the NMS.
To create the routes that would be discovered with a router connection, the DCE
Manager must have access to the MCC backplane s1b subnet in the Hotwire
chassis. The MCC card acts as the gateway to add the first route to gain
connectivity to the DSL cards and remote RTUs. Open a DOS window and enter
the command Route.
Windows 95 syntax example:
H NMS = 135.90.51.1
H MCC card = 135.90.51.220 on the same subnet as the NMS 130.90.51
H DSL card = 135.90.52.10 on subnet 135.90.52
H 5446 RTU = 135.90.52.12 on the same subnet as the DSL card 135.90.52
Windows 95 route statement for the NMS at 135.90.51.1:
route add 135.90.52.10 135.90.51.220
route add 135.90.52.12 135.90.51.220