Filter
Top Products
4. Configuration Options
4-14
September 2002 9128-A2-GB20-80
When the Automatic Backup Configuration setting is changed, the following
prompts appear. N
o is the default for these prompts.
When the . . .
The following prompt
appears . . . If you select . . .
Automatic Backup
Configuration setting
was changed, and
Save was selected
Saving will cause
Auto-Configuration
to update and
Restart. Are you
sure?
No – No Auto-Configuration
updates are performed and
updates due to LMI response
messages are performed
according to the previously
saved setting.
Ye s – The
Delete All
DLCIs and PVC
Connections?
prompt
appears.
Response to the
Delete All DLCIs
and PVC
Connections?
prompt was N
o, and
Automatic Backup
Configuration was
disabled
Delete All
Alternate
Destinations from
PVC Connections?
No – No previously configured
DLCIs or PVC connections are
removed or changed, and
newly discovered DLCIs will be
configured according to the
new discovery mode and
automatic backup setting.
Ye s – All multiplexed DLCIs,
ISDN Link Profiles (except for
the first one), and PVC
connections are deleted,
except for management PVCs
with the user data port as the
primary destination and
management PVCs designated
as the TS Management Link.
If an alternate destination has
been configured on a retained
Management PVC, the
alternate destination will be
deleted but the primary
destination will be retained.
Response to the
Delete All DLCIs
and PVC
Connections?
prompt was N
o, and
Automatic Backup
Configuration was set
to
Single_Site_Backup
or Multi_Site_Backup
Add Alternate
Destinations to
Current PVC
Connections?
Ye s – DLCI records are
configured on the ISDN link(s)
and Alternate Destination
information is added to current
PVC connections and
management PVCs.
No – No previously configured
PVC connections are changed,
and newly discovered DLCIs
will be configured according to
the new discovery mode and
automatic backup setting.