Filter
Top Products
DMD15/DMD15L IBS/IDR Satellite Modem User Interfaces
TM051 - Rev. 5.8 4-73
<1>
<1>
<2>
<2>
<2>
<2>
<1>
<1>
<1>
<1>
<1>
AUPC Remote BB
Loopback
AUPC Remote 2047
AUPC Target Eb/No
AUPC Minimum
Power
AUPC Maximum
Power
AUPC Nominal Power
Time Mark Transfer
Enable
Time Mark Transfer
Pattern Length
Reserved
Reserved
TPC Interleaver
4 = 2.5 dB/Min, 5 = 3.0 dB/Min, 6 = 3.5 dB/Min, 7 = 4.0 dB/Min,
8 = 4.5 dB/Min, 9 = 5.0 dB/Min, 10 = 5.5 dB/Min, 11 = 6.0
dB/min
0 = Disable, 1 = Enable
0 = Disable, 1 = Enable
Target Eb/No at Receiver
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two’s compliment)
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two’s compliment)
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two’s compliment)
0 = Disable, 1 = Enable
Unsigned Binary (4 to 16) Inclusively
Reserved
Reserved
0 = Disable, 1 = Enable
Opcode: <2602h> Command a modulator's frequency
<4>
Frequency
Selects the IF Frequency in Hz. The range is 50 MHz to 180
MHz for the 70/140 MHz type modems and 950 MHz to 1750
MHz for the L-Band modems.
Note: This command also turns the carrier off to protect
the satellite.
Opcode: <2603h> Command a modulator's strap code
<2>
Strap Code Binary value
Note: This command also turns the carrier off to protect the
satellite.
Opcode: <2604h> Command a modulator's data rate
<4>
Data Rate Binary value, 1 bps steps
Note: This command also turns the carrier off to protect the
satellite.
Opcode: <2605h> Command a modulator's filter mask
<1>
Filter Mask 0 = INTELSAT, 1 = EUTELSAT, 2 = CLOSED NET1