Filter
Top Products
DMD15/DMD15L IBS/IDR Satellite Modem User Interfaces
TM051 - Rev. 5.8 4-25
Firmware Rev (menu):
Interface (menu):
UIO Code:
UIO Xilinx:
M&C:
Term Baud: {Same as remote baud listed below}
Displays the Terminal Port Baud Rate.
Emulation: {VT100, ADDS-VP, WYSE 50}
Allows the user to select the Terminal Emulation Mode
for the Terminal Port.
Remote Addr: {32 - 255}
Allows the user to enter the Remote Port Multidrop
Address.
Remote Baud: {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38,400}
Allows the user to enter the Remote Port Baud Rate.
4.3.9 Test Menu Options and Parameters
2047 Test: {None, Tx, Rx, Tx/Rx}
Allows the user to enable or disable the 2047 Pattern
Test. “Tx” enables the transmit pattern generator. “Rx”
enables the receive pattern checker. “Tx/Rx” enables
both.
Insert Errors: {0000 - 9999}
Allows the user to select the number of errors to insert.
Once the number of errors to insert has been selected,
pressing ‘Enter’ twice causes the number of errors
shown to be inserted in the data stream.
2047 Errors: {No Sync, nnnn}
Displays the number of errors detected by the 2047
Pattern checker.
2047 BER: {No Sync, nnnn x 10
-9
}
Displays the measured BER for the 2047 Pattern.
Clear 2047: {Ent = Y, Clr = N}
Restarts 2047 BER Test.