Filter
Top Products
User Interfaces DMD15/DMD15L IBS/IDR Satellite Modem
4-76 TM051 – Rev. 5.8
Opcode: <262Ah> Command AUPC Remote Enable
<1>
AUPC Remote Enable 0 = Off, 1 = On
Opcode: <262Bh> Command AUPC Local CL Action
<1>
AUPC Local CL Action 0 = Hold, 1 = Nominal, 2 = Maximum
Opcode: <262Ch> Command AUPC Remote CL Action
<1>
AUPC Remote CL
Action
0 = Hold, 1 = Nominal, 2 = Maximum
Opcode: <262Dh> Command AUPC Tracking Rate
<1> AUPC Tracking Rate 0 = 0.5 dB/Min, 1 = 1.0 dB/Min, 2 = 1.5 dB/Min, 3 = 2.0 dB/Min,
4 = 2.5 dB/Min, 5 = 3.0 dB/Min, 6 = 3.5 dB/Min, 7 = 4.0 dB/Min,
8 = 4.5 dB/Min, 9 = 5.0 dB/Min, 10 = 5.5 dB/Min, 11 = 6.0
dB/min
Opcode: <262Eh> Command AUPC Remote Baseband Loopback
<1> AUPC Remote BB
Loopback
0 = Disable, 1 = Enable
Opcode: <262Fh> Command AUPC Remote Test 2047
<1> AUPC Remote 2047 0 = Disable, 1 = Enable
Opcode: <2630h> Command AUPC Eb/No
<2> AUPC Target Eb/No Target Eb/No at Receiver
Opcode: <2631h> Command AUPC Minimum Power
<2> AUPC Minimum
Power
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two’s compliment)
Opcode: <2632h> Command AUPC Maximum Power
<2> AUPC Maximum
Power
Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two’s compliment)
Opcode: <2633h> Command AUPC Nominal Power
<2> AUPC Nominal Power Singed value +50 to –200 with implied decimal point; 49 = +4.9
dBm (two’s compliment)
Opcode: <2634h> Command AUPC Local Configuration
<1>
<1>
<1>
<1>
<2>
<2>
AUPC Local Enable
AUPC Local CL
Action
AUPC Tracking Rate
AUPC Remote CL
Action
AUPC Target Eb/No
AUPC Minimum
0 = Off, 1 = On
0 = Hold, 1 = Nominal, 2 = Maximum
0 = 0.5 dB/Min, 1 = 1.0 dB/Min, 2 = 1.5 dB/Min, 3 = 2.0 dB/Min,
4 = 2.5 dB/Min, 5 = 3.0 dB/Min, 6 = 3.5 dB/Min, 7 = 4.0 dB/Min,
8 = 4.5 dB/Min, 9 = 5.0 dB/Min, 10 = 5.5 dB/Min, 11 = 6.0
dB/min
0 = Hold, 1 = Nominal, 2 = Maximum
Target Eb/No at Receiver
Singed value +50 to
–
200 with implied decimal point; 49 = +4.9