Filter
Top Products
User Interfaces DMD15/DMD15L IBS/IDR Satellite Modem
4-86 TM051 – Rev. 5.8
<1>
<1>
<1>
<1>
<4>
<4>
<2>
<2>
<2>
<4>
<2>
<1>
<1>
<1>
Latched Alarm 3
Latched Common
Alarm 1
Latched Common
Alarm 2
Backward Alarm
Error Counter
Test 2047 Error
Counter
Raw BER Mantissa
Corrected BER
Mantissa
EbNo
Offset Frequency
Test 2047 BER
Mantissa
Raw BER Exponent
Corrected BER
Exponent
Test 2047 BER
Bit 4 = RS Decoder Lock Fault. 1 = Fail
Bit 5 = RS De-Interleaver Fault. 1 = Fail
Bit 6 = RS Decoder Uncorrectable Word. 1 = Fail
Bit 7 = Summary Fault. 1 = Fail
Bit 0 = IF synthesizer lock detect Fault. 1 = Fail
Bit 1 = Rx Oversample PLL lock detect. 1 = Fail
Bit 2 = Buffer clock PLL lock detect. 1 = Fail
Bit 3 = Viterbi decoder lock (Not Latched)
Bit 4 = Sequential decoder lock (Not Latched)
Bit 5 = Rx 2047 test pattern lock (Not Latched)
Bit 6 = External reference PLL lock (Not Latched)
Bit 7 = IDR 96 PLL Lock. 1 = Fail
Bit 0 = -12V alarm. 1 = Fail
Bit 1 = +12V alarm. 1 = Fail
Bit 2 = +5V alarm. 1 = Fail
Bit 3 = Reserved
Bit 4 = Battery. 1 = Fail
Bit 5 = RAM and ROM alarm flag. 1 = Fail
Bits 6 and 7 = Spares
Bit 0 = M&C processor fault 1 = Fail
Bit 1 = U IO card present alarm 1 = Fail, reserved in
RCS10/10L mode
Bit 2 = IF card present alarm 1 = Fail
Bits 3 - 7 = Spares
Bit 0 = Backward Alarm 1 IDR and IBS
Bit 1 = Backward Alarm 2 IDR only
Bit 2 = Backward Alarm 3 IDR only
Bit 3 = Backward Alarm 4 IDR only
Bits 4 - 7 = Reserved
0 = No, 1 = Yes
Binary value
Binary value
Bytes 1 - 2 = Binary value Raw BER 896 = 8.96
Bytes 1 - 2 = Binary value corrected BER
Binary value, 1 decimal point implied 700 = 7.00
Binary value, 1 Hz steps
Bytes 1 - 2 = Binary value test 2047 BER
Byte 3 = Binary value exponent
Byte 3 = Binary value exponent
Byte 3 = Binary value exponent