Filter
Top Products
C. Traps and MIBs
C-4 November 2003 6300-A2-GB20-10
System Group
System Group objects are fully supported by the DSL router, as shown in
Table C-2, System Group Objects.
NOTE:
The System Name, System Contact, and System Location objects can be
configured via the port card (A-F). Values will display in Monitoring (B-E).
However, the DSL router uses and displays the SNMP information set via the
System Group.
Table C-2. System Group Objects (1 of 2)
Object Description Setting/Contents
sysDescr
(system 1)
Provides a full name and
version identification for the
Hotwire system’s hardware
and software.
The object is set to display a string in the following format:
PARADYNE Hotwire DSL; Model: xxxx-xx-xxx;
S/W Release: yyy.yy.yy; H/W Release: zzzz-zzz;
Serial Number: ssssssssssss; Boot: Bbb.bb.bb;
2nd Boot: Sxx.xx.xx; DSP: x.xx
Model starts with the 4-digit model number:
6301 – IDSL router
6302 – IDSL 4-port router
6341 – SDSL router
6342 – SDSL 4-port router
6351 – ReachDSL router
6371 – RADSL router
sysObjectID
(system 2)
Identifies the network
management subsystem for
the DSL router.
OIDs (Object Identifiers):
6301 IDSL router – 1.3.6.1.4.1.1795.1.14.9.9.35
6302 IDSL 4-port router – 1.3.6.1.4.1.1795.1.14.9.9.36
6341 SDSL router – 1.3.6.1.4.1.1795.1.14.9.9.25
6342 SDSL 4-port router – 1.3.6.1.4.1.1795.1.14.9.9.26
6351 ReachDSL router – 1.3.6.1.4.1.1795.1.14.9.9.39
6371 RADSL router – 1.3.6.1.4.1.1795.1.14.9.9.29
sysContact
(system 4)
Provides the contact
information for the person
managing the DSL router.
ASCII character string (32 characters), as set by the user:
badValue(3) – Field length exceeded.
sysName
(system 5)
Provides a contact name for
the DSL router.
ASCII character string (32 characters), as set by the user:
badValue(3) – Field length exceeded.
sysLocation
(system 6)
Provides the physical location
for the DSL router.
ASCII character string (32 characters), as set by the user:
badValue(3) – Field length exceeded.