Filter
Top Products
D. DSL Router Terminal Emulation
D-2 November 2003 6300-A2-GB20-10
Terminal Emulation Programs
Examples of configuring two different terminal emulation programs:
HyperTerminal – playback feature is accessed through its Transfer menu.
Procomm+ – playback feature is accessed through its Online menu.
Procedure
To configure the HyperTerminal:
1. Select menu option Transfer → Send Text File.
2. Select File → Properties.
3. In the Properties dialog, select the Settings tab.
4. Set Emulation to VT100.
5. Select the Terminal Setup button and set to 132 column mode.
6. Select OK to exit Terminal Setup.
7. Select the ASCII Setup button.
— Set Line delay to 50 ms.
— Set Character delay to 2 ms.
8. Select OK to exit ASCII Setup.
9. Select OK to exit Properties.
Procedure
To configure Procomm+:
1. Select menu option Online → Send File.
2. In the Send File dialog, set the protocol to ASCII.
3. Select the Setup button.
4. Select the Transfer Protocol button (on the left).
5. Select ASCII in the Current Protocol drop-down box.
— Set delay between Character to 2 ms.
— Set delay between Lines to 2 ms.
6. Check and set Use 13 for Line pace character.
7. Check display text.
8. Save the configuration.