Filter
Top Products
C. Traps and MIBs
C-10 November 2003 6300-A2-GB20-10
Transmission Group
The objects in the Transmission Group are supported for the Ethernet Interface.
These objects are not defined within MIB II but rather through other
Internet-standard MIB definitions. The objects in the transmission group are
extended by RFC 2665 MIB definitions. The object dot3 (Transmission group 7) is
supported on the Ethernet Interface.
SNMP Group
SNMP Group objects applying to a management agent are fully supported. The
following objects only apply to an NMS, and return a value of 0 (zero) if accessed:
snmpInTooBigs (snmp 8)
snmpInNoSuchNames (snmp 9)
snmpInBadValues (snmp 10)
snmpInReadOnlys (snmp 11)
snmpInGenErrs (snmp 12)
snmpInGetResponses (snmp 18)
snmpInTraps (snmp 19)
snmpOutGetRequests (snmp 25)
snmpOutGetNexts (snmp 26)
snmpOutSetRequests (snmp 27)
ipCidrRouteNextHopAS
(ipCidrRouteEntry 10)
Next hop route. Always set to a value of 0 (zero).
ipCidrRouteMetric1 –
ipCidrRouteMetric5
(ipCidrRouteEntry 11 –
ipCidrRouteEntry 15)
For future use. Only value accepted is –1.
ipCidrRouteStatus
(ipCidrRouteEntry 16)
Used to create or delete rows in a
table.
—
Table C-6. IP CIDR Route Group Objects (2 of 2)
Object Description Setting/Contents