Filter
Top Products
6300-A2-GB20-10 November 2003 4-1
4
DSL Router Configuration
Examples
Configuration Examples
The Hotwire DSL Router configuration examples in this chapter include only a
few of the possible scenarios. This chapter covers some of the common
configurations. The command syntax will vary based on your network setup.
Configuration commands require the access level of Administrator-Config and
changes need to be saved while in configuration mode to take effect. Refer to
Chapter 2, Accessing the DSL Router.
The Hotwire DSL Router configuration examples include:
Basic Bridging Configuration Example
Basic Routing Configuration Example
Basic NAT Configuration Example
NAPT Configuration Example
Simultaneous Basic NAT and NAPT Configuration Example
Unnumbered DSL Interface with Proxy ARP Configuration Example
DHCP Relay with Proxy ARP Configuration Example
DHCP Server with Basic NAT Configuration Example
PPPoE Client with NAPT and DHCP Server Configuration Example
Downstream Router Configuration Example
IP Passthrough Configuration Example
Refer to Appendix A, Command Line Interface, for specific commands and their
syntax. Refer to Appendix B, Configuration Defaults and Command Line
Shortcuts, for specific command default settings and abbreviated command line
syntax.