Filter
Top Products
7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide
98 Creating an ATM Routable Link
Creating an ATM Routable Link
Now that you have a DSL link, do the following to configure a WAN service.
Remote side configuration
From the WWW interface:
1. Click
Configuration.
2. Click Create a new service.
3. Enable RFC 1483 routed.
4. Click Configure.
5. Type a description of the DSL Link.
6. Type in the IP address 192.168.164.2.
7. Click Apply.
8. Save the configuration.
Central side configuration
From the WWW interface:
1. Click
Configuration.
2. Click Create a new service.
3. Enable RFC 1483 routed.
4. Click Configure.
5. Type a description of the DSL Link.
6. Type in the IP address 192.168.164.1.
7. Click Apply.
8. Click G.SHDSL.