Filter
Top Products
5 • Specialized Configurations Model 3201 G.SHDSL Integrated Access Device User Guide
80 IP Configurations
IP Configurations
The router can be configured to use the RIP routing protocol, version 1 or 2, for accepting and sending RIP
packets.
Router
RIP and RIPv2
Static Route
1. Click on > Configuration, then > IP Routes on the Configuration Menu.
2. On the main web page entitled “Edit Routes,” click on
Create new Ip V4 Route.
3. Enter the destination IP address in the Value field of “Destination.”
4. Enter the IP address of the gateway which is the WAN IP address of the device on the other end of the
DSL link in the Value field of “Gateway.”
5. Enter the appropriate netmask in the Value field of “Netmask.”
6. Leave Cost as “1.”
7. “Interface” is an ASCII field which you may leave blank or fill in for your identification.
8. Click
OK.
9. Add additional static routes using the same procedure.