4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide
32 Two stand-alone units directly connected
– LLC header mode = off
– HDLC header mode = on
– No authentication
– Leave User name and Password blank.
Click on
Apply.
3. Go to
G.SHDSL in the Configuration Menu, then the submenu Configuration.
Leave Terminal Type as Remote.
Change Interface Type to
hdlc. Click on the Configure button.
In the Action submenu under G.SHDSL, change Action to
Deactivate, then click on Action.
Return to Action, select
Start and click on Action.
Network Extension (HDLC—PPPoH Routed)
Model 3201 (Remote) Configuration Steps (PPPoH Routed)
From the command line interface (CLI) via the RS-232 control port,
→
ip list interfaces
One IP interface was called ip1 with an IP address of 192.168.1.1 Change it to an IP address which is in the
same subnet as the Desktop PC. For example, to 192.168.100.2. The default IP mask is 255.255.255.0.
→
ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0