Filter
Top Products
5
Compliance Information
Radio
and TV
Interference
The Model 3201 or 3241 generates and uses radio frequency energy, and if not installed and used properly-
that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television
reception. The Models 3201 and 3241 have been tested and found to comply with the limits for a Class A
computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed
to provide reasonable protection from such interference in a commercial installation. However, there is no
guarantee that interference will not occur in a particular installation. If the Model 3201 or 3241 does cause
interference to radio or television reception, which can be determined by disconnecting the unit, the user is
encouraged to try to correct the interference by one or more of the following measures: moving the computing
equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment
into a different AC outlet (such that the computing equipment and receiver are on different branches).
CE Notice
The CE symbol on your Patton Electronics equipment indicates that it is in compliance with the Electromag-
netic Compatibility (EMC) directive and the Low Voltage Directive (LVD) of the European Union (EU). A
Certificate of Compliance is available by contacting Technical Support.
FCC Part 68
1.
You are required to request service from the telephone company before you connect the Model 3201 or
3241 to a network. When you request service, you must provide the telephone company with the follow-
ing data.
— The required Universal Service Order code (USOC) jack: RJ-11C
— The make, model number, Ringer Equivalence Number (REN), and FCC Registration number of the
Model 3201 or 3241.
The REN helps you determine the number of devices you can connect to your telephone line and still have
all of those devices ring when your number is called. In most, but not all, areas, the sum of the RENs of all
devices should not exceed five (5.0). To be certain of the number of devices you can connect to your line,
you should call your local telephone company to determine the maximum REN.
— The Facility Interface Code:
02LS2
— The Service Order Code(s) (SOC):
9.0F
— REN No.:
0.2
2.
Your telephone company may make changes to its facilities, equipment, operations, or procedures that
could affect the proper functioning of your equipment. The telephone company will notify in advance of
such changes to give you an opportunity to maintain uninterrupted telephone service.
The Model 3201 is not intended to be connected to the public
telephone network.