Filter
Top Products
7 • NAT (Network Address Translation) Model 3201 G.SHDSL Integrated Access Device User Guide
96 Introduction
Introduction
Network Address Translation (NAT) provides unlimited local host addresses, enabling users to connect to the
Internet without having to provide a new address for each and every host. An encryption capability helps keep
actual addresses confidential. This chapter describes how to configure for NAT.
Creating an Ethernet Transport
1. From Console on the Remote unit configure the following:
→
ip set interface ip1 ipaddress 192.168.100.11 255.255.255.0
→
system config save
2. From Console on the Central unit configure the following:
→
ip set interface ip1 ipaddress 209.49.110.130 255.255.255.0
→
system config save
Now you should be able to reach the unit through the Ethernet port from the local side using Telnet or the
WWW interface. This instructions in this procedure are intended for the WWW interface.
Creating a DSL Link
You will need the following to create a DSL link:
• One Model 3201 unit configured as Remote
• One Model 3201 unit configured as Central