Patton electronic 3201 Modem User Manual


 
DSLAM Connections with remote CPE units 41
Model 3201 G.SHDSL Integrated Access Device User Guide 4 • Basic Application Configurations
In the Action submenu under G.SHDSL, change Action to Deactivate, then click on Action.
Return to Action, select Start and click on Action.
PPPoH Bridged Configuration
Model 3201 (Remote) Configuration Steps (PPPoH Bridged)
From the command line interface (CLI) via the RS-232 control port,
ip list interfaces
One IP interface is called ip1 with an IP address of 192.168.1.1 Change the IP address so it is in the same sub-
net as both PCs. For example, to 192.168.100.2
ip set interface ip1 ipaddress 192.168.100.2 255.255.255.0
1. Now you can bring up the web-page management system on your browser by entering the IP address of
the 3201.
2. On the Menu, go to
Configuration, then to WAN Connections. Delete the factory default WAN services
already defined.
Click on
Create a new service in the main window, select PPPoH_Bridged and click on the Configure button.