Paxar 6035 Printer User Manual


 
Editing a Format 11-11
Warning: New Length
less than old length
Press a key to
continue. Or ESC to
Abort> _
9. Press e to continue. You return to the
Edit Header menu.
NOTE: If your format has fields defined that are
close to the non-print zones (top or bottom
of the label) and you change the supply
length, those fields may print off the label
(causing this warning).
- Edit Header Menu -
1. Change Menu Name
2. Edit MPCL Number
3. Edit Description
4. Change Length
5. Change Width
10. Press 5 to change the supply width.
Select Supply Width
1. 1.20 Inches
2. 1.5 Inches
3. 2.00 Inches
11. Press 2 to change the supply width to 1.50
inches, instead of 2.0 inches.
Warning: New Width
less than old width
Press a key to
continue. Or ESC to
Abort > _
12. Press e to continue. You return to the
Edit Header menu.
NOTE: If your format has fields defined that are
close to the non-print zones (edges of the
label) and you change the supply width,
those fields may print off the label
(causing this warning).
- Edit Header Menu -
1. Change Menu Name
2. Edit MPCL Number
3. Edit Description
4. Change Length
5. Change Width
13. Press b to return to the Edit menu. Press
5 to exit the Edit menu.
Save changes? Y/N > _
14. Press Y. You return to the Format menu.