Filter
Top Products
Using the VCT 4-5
Save or Save As
1. Select File, Save or Save As… You can also click the buttons for
these options on the toolbar.
2. Enter a filename and click Save. The file is saved with a .VFX
extension.
Save as MPCL
1. Select File, Save As MPCL… or click the button for this option on the
toolbar. You are prompted for a filename if you have not already
entered one. Click Save.
2. Enter a configuration number. You can attach this configuration to a
particular format by using this number in the verifier field in your
format. See “Defining the Verifier Field” for more information.
(Earlier VCT versions prompted you for the format number.)
3. Enter a configuration name, up to eight characters. The name you
enter here appears in the offline menu for the mode selection.
See “Setting the Mode” in Chapter 5 for more information.
4. Click O
K.
5. Enter a filename at the prompt.
6. Click Save. The file is saved with a .MVF extension on the host.
Send the file the way you normally send data to your printer: TCP/IP,
serial, or parallel port; or using MPCL Toolbox’s File Download.