Filter
Top Products
Configuring the Printer 5-3
Setting the Scan Beam
You can control whether the scan beam is turned off between labels or
left on continuously. Depending on your application, you may want the
scan beam on continuously.
To change the setting, from the Main Menu, select Setup, then Verifier.
Then follow these steps.
1. Press or until you see
VERIFIER
Scan Beam
2. Press Enter/Pause. The current setting is displayed, for example:
SCAN BEAM
Off When Idle
3. Press or to see the other option. After you display the option
you want, press Enter/Pause.
Do not let the verifier stop on a bar code when logging data,
because it continues to log data from that bar code.
4. Press Escape/Clear until you see the Main Menu.