Filter
Top Products
Getting Started 1-1
GETTING STARTED
Use these Operating Instructions to set up, use, and configure the
Monarch 938 verifier. The verifier works with the Monarch
9855 printer and 9860 printer with knife. The verifier can scan a wide
variety of one-dimensional parallel bar codes. However, it cannot scan
MSI bar codes or two-dimensional bar codes.
Information in this document supercedes information in previous versions.
Check our Web site (www.paxar.com) for the latest documentation and
release information.
The verifier saves data from each bar code it scans. You can use
immediate commands to upload scan grade data and bar code data from
the verifier. Refer to the Programmer’s Addendum available on our Web
site for more information.
Using this Manual
Following is a summary of the contents of this manual:
Chapter Contents
1 Getting Started
Information you should know before using the
verifier.
2
Installation &
Setup
Installing and positioning the verifier.
3
Calibrating the
Verifier
Setting up the verifier with ScanVision software.
4 Using the VCT
Changing parameters, sending files, and sample
configuration packets.
5
Configuring the
Printer
Setting the printer to work with your verifier.
6 Troubleshooting Common problems and their solutions.
A Specifications Verifier and laser scanner specifications.
1